International Wire Products

Metal Beam Crash Barrier

Metal Beam Crash Barrier

Crash barriers are designed to withstand the impact of vehicles of certain weights at certain angle while traveling at the specified speed. They are expected to guide the vehicle back on the road while keeping the level of damage to vehicle as well as to the barriers within acceptable limits. Ideally a crash barrier should present a continuous smooth face to an impacting vehicle, so that the vehicle is redirected, without overturning, to a course that is nearly parallel to the barrier face and with a lateral deceleration, which is tolerable to the motorist. To achieve these aims the vehicle must be redirected without rotation about both its horizontal or vertical axis (that is, without ‘spinning out’ or overturning), and the rate of lateral deceleration must be such as to cause the minimum risk of injury to he passengers.

Technical Specifications

  • Cold Roll formed
  • Hot Dip Galvanized (550 GSM minimum)


Post / Spacer :

  • Cold Roll formed "C" channel
  • Size: 150 x 75mm and 5mm thick
  • Available in customised lengths
  • Hot Dip Galvanized (550 GSM - minimum)
  • Post Spacing : 1.5 to 2.0 Mtr. C/C


  • Metal Beam Crash Barrier 01

  • Metal Beam Crash Barrier 02

  • Metal Beam Crash Barrier 03